|
| MOQ: | 500kgs |
| Price: | 2.8-3.8 |
| Standard Packaging: | 6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box. |
| Delivery Period: | 5-6 working days |
| Payment Method: | L/C, T/T |
| Supply Capacity: | 6000MT per month |
DESCRIPTION
The JaourTak ® is a synthetic rubber based hot melt pressure sensitive adhesive specifically developed for high performance product assembly applications where good tack and adhesion are required, such as waterproofing roll materials for construction. The product is featured light color, high tack and peel and holding power, and good flexibility under low temperature.
SUGGESTED USES
Waterproofing rolled goods for construction assembly, or other pressure sensitive adhesive applications that high tack and peel, light color, and flexibility are required.
TYPICAL PROPERTIES
| Appearance | waterwhite Solid |
| Color (Gardner) | ≤ G1 |
| Softening Point (R&B) | approx. 101°C |
| Viscosity (Brookfield) | |
| @140 ° C | approx. 46,000cps |
| @160 ° C | approx.18,500cps |
| @180 ° C | approx.10,100 |
| @200 ° C | approx.7,200 |
OPERATING GUIDES
The material can be applied by slot or roll coating applicators. Suggested operation temperature is 150 – 180 ° C for both, depending on machines, substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.
PACKAGE
6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box.
Please consult the sales representative for special requirements.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 35 ° C and above 5 ° C.
Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.
Video
Video
Video
Video
|
|
| MOQ: | 500kgs |
| Price: | 2.8-3.8 |
| Standard Packaging: | 6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box. |
| Delivery Period: | 5-6 working days |
| Payment Method: | L/C, T/T |
| Supply Capacity: | 6000MT per month |
DESCRIPTION
The JaourTak ® is a synthetic rubber based hot melt pressure sensitive adhesive specifically developed for high performance product assembly applications where good tack and adhesion are required, such as waterproofing roll materials for construction. The product is featured light color, high tack and peel and holding power, and good flexibility under low temperature.
SUGGESTED USES
Waterproofing rolled goods for construction assembly, or other pressure sensitive adhesive applications that high tack and peel, light color, and flexibility are required.
TYPICAL PROPERTIES
| Appearance | waterwhite Solid |
| Color (Gardner) | ≤ G1 |
| Softening Point (R&B) | approx. 101°C |
| Viscosity (Brookfield) | |
| @140 ° C | approx. 46,000cps |
| @160 ° C | approx.18,500cps |
| @180 ° C | approx.10,100 |
| @200 ° C | approx.7,200 |
OPERATING GUIDES
The material can be applied by slot or roll coating applicators. Suggested operation temperature is 150 – 180 ° C for both, depending on machines, substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.
PACKAGE
6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box.
Please consult the sales representative for special requirements.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 35 ° C and above 5 ° C.
Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.
