Product Details:
Payment & Shipping Terms:
|
| Product: | High Peel Strength Hot Melt Glue Adhesive For Nonwoven Medical Plaster Pasting | Material: | Rubber Based |
|---|---|---|---|
| Odor: | Low | Color: | Light Yellow Transparent Or Milky White |
| Samples: | Available | Shelf Life: | 24 Months |
| High Light: | glue hot melt For Nonwoven Tape,Glue Hot Melt For Diaper,diaper adhesive |
||
High Peel Strength Hot Melt Glue Adhesive For Nonwoven Medical Plaster Pasting
SUGGESTED USES
Medical tapes, plasters and bandages to various substrates, wound dressing.
Other pressure sensitive adhesive applications that high bond strength and tack, high shear are required.
TYPICAL PROPERTIES
| Appearance: | Light yellow translucent solid |
| Color (Gardner): | ≤ G5 |
| Softening Point (R&B): | 109±5℃ |
| Viscosity (Brookfield): | @140℃ approx. 27.000±1000 cps |
OPERATING GUIDES
The material can be applied by slot or roll coating applicators. Suggested operation temperature is 150 – 180 0 C
for both, depending on machines, substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.
PACKAGE
6.25kg or 1.045kg block wrapped with siliconized release paper, 25kg/box.
Please consult the sales representative for special requirements.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original
packages under dry and clean conditions at ambient temperature below 35 0 C and above 5 0 C.
Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal
protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is
suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.
Our Certificate
Contact Person: Victor
Tel: +8615216725374
