Payment & Shipping Terms:
|Product:||Low Coating Temperature Hot Melt Adhesive For Nonwoven Tape Manufacturing||Material:||Rubber Based|
|Odor:||Low||Color:||Light Yellow Transparent Or Milky White|
|Samples:||Available||Shelf Life:||24 Months|
Hot Melt Industrial Zinc Oxide Adhesive For Nonwoven Tape Manufacturing
The material can be applied by slot or roll coating applicators. Suggested operation temperature is 150 – 180 0 C
for both, depending on machines, substrates, and plant conditions.
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.
6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box.
Please consult the sales representative for special requirements.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original
packages under dry and clean conditions at ambient temperature below 35 0 C and above 5 0 C.
Direct sunlight and moisture condensation must be prevented.
Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal
protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is
suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.
|Chemical base||Rubber based hot melt glue|
|Color||Yellow, light yellow|
|Viscosity(180℃, mpa.s)||25,000 ± 5,000|
|Density g/cm3||0.95 ± 0.05|
|Softening point (℃)||150 ± 8|
|Processing temperature (℃)||180 ~ 195|
|Open time (s)||50~120|
|Shelf Life||24 months in the original packaging.|
MegaMelt® 9001 is a polyolefin hot melt adhesive that can be used to bond ABS, PP and other substrates. It has a wide range of applications in car interiors, such as the bonding of car roofs and interior accessories. The product has the following characteristics:Characters:
l Good high/low temperature resistance;
l Sag resistance (no-sag at 100℃ ) ;
l Excellent weather resistance ;
l Appropriate operating time can achieve rapid positioning;
l Solidification is reversible, and reheating can make it melt.
|Application||MegaMelt® 9001 products have a wide range of applications in automotive interiors, such as the bonding of automotive headlining and interior accessories.|
Contact Person: Alex