Payment & Shipping Terms:
|Appearance:||Water White Transparant Solid||Materials:||Rubber Based|
Elastic Hot Melt PSA Adhesive,
Rubber Based Hot Melt PSA Adhesive,
Pants Diaper Hot Melt PSA Adhesive
The JaourMelt® 5939U is a synthetic rubber based hot melt adhesive specifically developed for elastic strands fixation of nonwoven disposables. It is florescent free and featured low odor and light color. It is with high cohesion and high creep resistance, good machinability, high bond strength, and ageing performance.
Elastic fixation adhesive for nonwoven disposable applications.
|Appearance||Water white transparant solid|
|Color (Gardner)||≤ G1|
|Softening Point (R&B)||approx. 100 °C|
The material can be applied by all types of elastic spray and slot applicators. Suggested operation temperature is
150 – 1800C, depending on machines, substrates, and plant conditions.
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.
1kg sausage wrapped with meltable film, 25kg/box. Please consult the sales representative for special requirement.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 35°C and above 50°C. Direct sunlight and moisture condensation must be prevented.
Do not mix with other adhesives to prevent contamination.The material is applied hot. Appropriate personal protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.
The product is not considered as hazardous within the meaning of the valid (EU) preparation directive.
Skin Contact :Molten product adheres to the skin may cause burns
Direct contact may cause eye irritation.
Negligible hazard at ambient temperature. Vapors and/or aerosols which may be
formed at elevated temperature may be irritating to eyes and respiratory tract.
No evidence of harmful effects from available information.
Skin Contact :
Molten product. Immediately cool down the affected area by flushing with cold
water to dissipate heat. Seek medical attention.
Eye Contact :
If hot, immediately cool down the affected area by flushing with cold water to
dissipate heat. Get medical attention promptly.
Move to fresh area. Get medical attention if irritation persists.
FIRE FIGHTING MEASURES
Extinguishing media :Water spray, foam, dry chemicals, and carbon dioxide.
Unsuitable Extinguishing media :Water in a jet may disperse fire.
Special protection equipments for firefighters :
Use adequate personal protective equipments and self contained breathing
Unusual fire and explosion
Not classified as flammable but will burn. Hazardous combustion products may
include carbon monoxide, carbon dioxid
Contact Person: Gordon