Payment & Shipping Terms:
|Material:||Rubber Base||Rubber Base:||Light Yellow Translucent Solid|
|Shape:||Solid Blocks||Packaging:||Cartons With Plastic Pallets|
Synthetic Rubber Based Hot Melt Adhesive PSA Glue for Waterproof Membrane
The JaourTak® 2071M is a synthetic rubber based hot melt pressure sensitive adhesive specifically developed for high performance product assembly applications where good tack and adhesion are required, such as waterproofing roll materials for construction. The product is featured light color, high tack and peel and holding power, and good flexibility under low temperature.
Waterproofing rolled goods for construction assembly, or other pressure sensitive adhesive applications that high tack and peel, light color, and flexibility are required.
|Composition||Resin and thermoplastic rubber|
|Gardner Color||≤ G1|
|Appearance||Light yellow translucent solid|
|Brookfield Viscosity||6200 mPa.s at@200°C|
|10100 mPa.s at@180°C|
|19500 mPa.s at@160°C|
|43000 mPa.s at@140°C|
|Softening point||Approx. 101°C|
|Application Instruction||1. Suggested operation temperature: 150°C-180°C.|
|2. Application methods : slot or roll coating.|
|3. Substrates, release paper and application environment will affect its adhesion performance, so trial use is recommended.|
4. There should be no dust and oil on substrates and release paper.
Substrates should be well conditioned under standard temperature and humidity
|Package||6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box.|
|Storage||The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 350C and above 50C. Direct sunlight and moisture condensation must be prevented.|
Contact Person: Alex