|
| MOQ: | 1000kg |
| Price: | Negotiation |
| Standard Packaging: | 1kg sausage wrapped with meltable film, 25kg/box |
| Delivery Period: | 7 working days |
| Payment Method: | T/T, D/P, L/C, D/A |
| Supply Capacity: | 4000 TON per Month |
FDA Certificated PSA Glue With High Aging Resistance For Hygiene Use
| Composition | Resin and thermoplastic rubber |
| Gardner Color | ≤ G1 |
| Appearance | Light yellow translucent solid |
| Brookfield Viscosity | 6200 mPa.s at@200°C |
| 10100 mPa.s at@180°C | |
| 19500 mPa.s at@160°C | |
| 43000 mPa.s at@140°C | |
| Softening point | Approx. 101°C |
| Application Instruction | 1. Suggested operation temperature: 150°C-180°C. |
| 2. Application methods : slot or roll coating. | |
| 3. Substrates, release paper and application environment will affect its adhesion performance, so trial use is recommended. | |
|
4. There should be no dust and oil on substrates and release paper. Substrates should be well conditioned under standard temperature and humidity |
|
| Package | 6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box. |
| Storage | The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 350C and above 50C. Direct sunlight and moisture condensation must be prevented. |
| glue type | hot melt PSA |
| application | diapers, sanitary napkins, pads |
| use | construction glue, elastic glue, positioning glue |
Suggest:
Usage:
1. Recommended operating temperature: 150°C-175°C
2. If there is carbon remaining in the rubber box or rubber pipe, you can consult the manufacturer or you can
make a clean out with the help of clean mineral oil under 120°C.
3. When coating, the viscosity can be adjusted by temperature.
4. It is unacceptable to mix it with other types of hot melt adhesive.
5. After filling up the hot melt adhesive slot, please close the lid of rubber slot in case of pollution from external impurities.
Clean:
Please keep the equipment clean; clear the adhesive melting box regularly. Control the temperature of the adhesive
melting box under 150°C when clearing it. Empty all remaining adhesive before adding new adhesive. Turn off the machine
when not using it.
Safety:
Because of the high running temperature, please wear protective clothes, eyeshade, and glove when working.
Noted:
This test result is given by our company test method and equipment. Different test method may cause the result a little
different. So in order not to cause unexpected loss, we suggest that you make a test before using the product.
Company Information
Shanghai Jaour attracts a team of experienced elitists in hot melt adhesive industry. The company is specialized in
pressure sensitive hot melt adhesive for nonwoven disposables, medicals, industrial tapes & labels, and waterproofing
membranes, including the research & development, manufacturing, sales and after-sales services.
1) Rich experience in OEM & ODM service, our customers cover more than 50 countries.
2) Professional management team and standard quality control procedures.
3) Modern facilities and hygenic standard workshop.
4) Advanced production equipments.
5) We own 3 branch factories.
7) We have enjoyed an excellent reputation from 20 Years' successful business experience.
Video
Video
Video
Video
Video
|
|
| MOQ: | 1000kg |
| Price: | Negotiation |
| Standard Packaging: | 1kg sausage wrapped with meltable film, 25kg/box |
| Delivery Period: | 7 working days |
| Payment Method: | T/T, D/P, L/C, D/A |
| Supply Capacity: | 4000 TON per Month |
FDA Certificated PSA Glue With High Aging Resistance For Hygiene Use
| Composition | Resin and thermoplastic rubber |
| Gardner Color | ≤ G1 |
| Appearance | Light yellow translucent solid |
| Brookfield Viscosity | 6200 mPa.s at@200°C |
| 10100 mPa.s at@180°C | |
| 19500 mPa.s at@160°C | |
| 43000 mPa.s at@140°C | |
| Softening point | Approx. 101°C |
| Application Instruction | 1. Suggested operation temperature: 150°C-180°C. |
| 2. Application methods : slot or roll coating. | |
| 3. Substrates, release paper and application environment will affect its adhesion performance, so trial use is recommended. | |
|
4. There should be no dust and oil on substrates and release paper. Substrates should be well conditioned under standard temperature and humidity |
|
| Package | 6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box. |
| Storage | The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 350C and above 50C. Direct sunlight and moisture condensation must be prevented. |
| glue type | hot melt PSA |
| application | diapers, sanitary napkins, pads |
| use | construction glue, elastic glue, positioning glue |
Suggest:
Usage:
1. Recommended operating temperature: 150°C-175°C
2. If there is carbon remaining in the rubber box or rubber pipe, you can consult the manufacturer or you can
make a clean out with the help of clean mineral oil under 120°C.
3. When coating, the viscosity can be adjusted by temperature.
4. It is unacceptable to mix it with other types of hot melt adhesive.
5. After filling up the hot melt adhesive slot, please close the lid of rubber slot in case of pollution from external impurities.
Clean:
Please keep the equipment clean; clear the adhesive melting box regularly. Control the temperature of the adhesive
melting box under 150°C when clearing it. Empty all remaining adhesive before adding new adhesive. Turn off the machine
when not using it.
Safety:
Because of the high running temperature, please wear protective clothes, eyeshade, and glove when working.
Noted:
This test result is given by our company test method and equipment. Different test method may cause the result a little
different. So in order not to cause unexpected loss, we suggest that you make a test before using the product.
Company Information
Shanghai Jaour attracts a team of experienced elitists in hot melt adhesive industry. The company is specialized in
pressure sensitive hot melt adhesive for nonwoven disposables, medicals, industrial tapes & labels, and waterproofing
membranes, including the research & development, manufacturing, sales and after-sales services.
1) Rich experience in OEM & ODM service, our customers cover more than 50 countries.
2) Professional management team and standard quality control procedures.
3) Modern facilities and hygenic standard workshop.
4) Advanced production equipments.
5) We own 3 branch factories.
7) We have enjoyed an excellent reputation from 20 Years' successful business experience.
