|
| MOQ: | 500kg |
| Price: | Negotiate |
| Standard Packaging: | 6.25kg/block, 4 blocks/25kg/carton |
| Delivery Period: | 5-8 work days |
| Payment Method: | L/C, D/A, D/P, T/T |
| Supply Capacity: | 5000 tons per month |
| Composition | Resin and thermoplastic rubber |
| Gardner Color | ≤ G1 |
| Appearance | Light yellow translucent solid |
| Brookfield Viscosity | 6200 mPa.s at@200°C |
| 10100 mPa.s at@180°C | |
| 19500 mPa.s at@160°C | |
| 43000 mPa.s at@140°C | |
| Softening point | Approx. 101°C |
| Application Instruction | 1. Suggested operation temperature: 150°C-180°C. |
| 2. Application methods : slot or roll coating. | |
| 3. Substrates, release paper and application environment will affect its adhesion performance, so trial use is recommended. | |
|
4. There should be no dust and oil on substrates and release paper. Substrates should be well conditioned under standard temperature and humidity |
|
| Package | 6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box. |
| Storage | The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 350C and above 50C. Direct sunlight and moisture condensation must be prevented. |
DESCRIPTION
| Material | Synthetic resin and rubber |
| Appearance | Light yellow transparent Solid 100%, (In Block) |
| Softening point | Approx. 81°C |
| Application temperature | 150-180 degree |
| Toxicity | None |
| Viscosity, cps: @125°C | 9800 Cps (as reference) |
| Viscosity, cps: @150°C | 2700 Cps (as reference) |
| Viscosity, cps: @175°C | 1500 Cps (as reference) |
| Storage | 1 years in dry and cool environment below 35°C and far from fire, unexposed to the sunlight |
SUGGEST
Usage:
1. Recommended operating temperature: 140°C-175°C
2. If there is carbon remaining in the rubber box or rubber pipe, you can consult the manufacturer or you can make a clean out with the help of clean mineral oil under 120°C.
3. When coating, the viscosity can be adjusted by temperature.
4. It is unacceptable to mix it with other types of hot melt adhesive.
5. After filling up the hot melt adhesive slot, please close the lid of rubber slot in case of pollution from external impurities.
Clean:
Please keep the equipment clean; clear the adhesive melting box regularly. Control the temperature of the adhesive melting box under 150°C when clearing it. Empty all remaining adhesive before adding new adhesive. Turn off the machine when not using it.
Safety:
Because of the high running temperature, please wear protective clothes, eyeshade, and glove when working.
Noted:
This test result is given by our company test method and equipment. Different test method may cause the result a little different. So in order not to cause unexpected loss, we suggest that you make a test before using the product.
More about Jaour
| Product name | |
| Main Material | Rubber, Resin and Glycerinum. |
| Payment | L/C, D/A, D/P, T/T, we are a big company and accept various payment method. |
| Shipping | Sea/Air shipment or express such as TNT, DHL, UPS and Fedex. |
| Packing | Usually 6.25kg/block and 4 blocks/ 25kgs/carton, carton size:535*257*228mm. |
| Why choose us? | We are factory with 21 years professional hot melt adhesive manufacture experience. |
| Certificate we have | ISO14000, ISO 9001, ROHS, REACH FDA |
Video
|
|
| MOQ: | 500kg |
| Price: | Negotiate |
| Standard Packaging: | 6.25kg/block, 4 blocks/25kg/carton |
| Delivery Period: | 5-8 work days |
| Payment Method: | L/C, D/A, D/P, T/T |
| Supply Capacity: | 5000 tons per month |
| Composition | Resin and thermoplastic rubber |
| Gardner Color | ≤ G1 |
| Appearance | Light yellow translucent solid |
| Brookfield Viscosity | 6200 mPa.s at@200°C |
| 10100 mPa.s at@180°C | |
| 19500 mPa.s at@160°C | |
| 43000 mPa.s at@140°C | |
| Softening point | Approx. 101°C |
| Application Instruction | 1. Suggested operation temperature: 150°C-180°C. |
| 2. Application methods : slot or roll coating. | |
| 3. Substrates, release paper and application environment will affect its adhesion performance, so trial use is recommended. | |
|
4. There should be no dust and oil on substrates and release paper. Substrates should be well conditioned under standard temperature and humidity |
|
| Package | 6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box. |
| Storage | The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 350C and above 50C. Direct sunlight and moisture condensation must be prevented. |
DESCRIPTION
| Material | Synthetic resin and rubber |
| Appearance | Light yellow transparent Solid 100%, (In Block) |
| Softening point | Approx. 81°C |
| Application temperature | 150-180 degree |
| Toxicity | None |
| Viscosity, cps: @125°C | 9800 Cps (as reference) |
| Viscosity, cps: @150°C | 2700 Cps (as reference) |
| Viscosity, cps: @175°C | 1500 Cps (as reference) |
| Storage | 1 years in dry and cool environment below 35°C and far from fire, unexposed to the sunlight |
SUGGEST
Usage:
1. Recommended operating temperature: 140°C-175°C
2. If there is carbon remaining in the rubber box or rubber pipe, you can consult the manufacturer or you can make a clean out with the help of clean mineral oil under 120°C.
3. When coating, the viscosity can be adjusted by temperature.
4. It is unacceptable to mix it with other types of hot melt adhesive.
5. After filling up the hot melt adhesive slot, please close the lid of rubber slot in case of pollution from external impurities.
Clean:
Please keep the equipment clean; clear the adhesive melting box regularly. Control the temperature of the adhesive melting box under 150°C when clearing it. Empty all remaining adhesive before adding new adhesive. Turn off the machine when not using it.
Safety:
Because of the high running temperature, please wear protective clothes, eyeshade, and glove when working.
Noted:
This test result is given by our company test method and equipment. Different test method may cause the result a little different. So in order not to cause unexpected loss, we suggest that you make a test before using the product.
More about Jaour
| Product name | |
| Main Material | Rubber, Resin and Glycerinum. |
| Payment | L/C, D/A, D/P, T/T, we are a big company and accept various payment method. |
| Shipping | Sea/Air shipment or express such as TNT, DHL, UPS and Fedex. |
| Packing | Usually 6.25kg/block and 4 blocks/ 25kgs/carton, carton size:535*257*228mm. |
| Why choose us? | We are factory with 21 years professional hot melt adhesive manufacture experience. |
| Certificate we have | ISO14000, ISO 9001, ROHS, REACH FDA |
