|
| MOQ: | 1000kg |
| Price: | Negotiation |
| Standard Packaging: | 1kg sausage wrapped with meltable film, 25kg/box |
| Delivery Period: | 7 working days |
| Payment Method: | T/T, D/P, L/C |
| Supply Capacity: | 4000 TON per Month |
Adhesive for Constrction application of diaper and sanitary napkin
Specification
| Name | PSA Hot Melt Adhesive Sanitary Napkins and Diapers Glue |
| Material | Synthetic resin and rubber |
| Appearance | Light yellow transparent Solid 100%, in Block |
| Softening point | Approx. 81°C |
| Application temperature | 150-180 degree |
| Smell | Slight smell of resin |
| Toxicity | None |
| Viscosity, cps: | |
| @125°C | 9800 Cps(as reference) |
| @150°C | 2700 Cps(as reference) |
| @175°C | 1500 Cps(as reference) |
| Storage | 2 years in dry and cool environment below 35°C and far from fire, unexposed to the sunlight |
OPERATING GUIDES
The material can be applied by all types of spray and slot applicators. Suggested operation temperature is 130 –
160 0 C for both, depending on machines, substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.
PACKAGE
1kg sausage wrapped with meltable film, 25kg/box.
Please consult the sales representative for special requirements.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original
packages under dry and clean conditions at ambient temperature below 35 0 C and above 5 0 C.
Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination.
The material is applied hot. Appropriate personal protective clothing and eye protection are strongly
recommended to prevent burns.
Adequate ventilation is suggested to remove any vapors or fumes generated.
Rotate stocks and using the oldest stock first.
| Composition | Resin and thermoplastic rubber |
| Gardner Color | ≤ G1 |
| Appearance | Light yellow translucent solid |
| Brookfield Viscosity | 6200 mPa.s at@200°C |
| 10100 mPa.s at@180°C | |
| 19500 mPa.s at@160°C | |
| 43000 mPa.s at@140°C | |
| Softening point | Approx. 101°C |
| Application Instruction | 1. Suggested operation temperature: 150°C-180°C. |
| 2. Application methods : slot or roll coating. | |
| 3. Substrates, release paper and application environment will affect its adhesion performance, so trial use is recommended. | |
|
4. There should be no dust and oil on substrates and release paper. Substrates should be well conditioned under standard temperature and humidity |
|
| Package | 6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box. |
| Storage | The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 350C and above 50C. Direct sunlight and moisture condensation must be prevented. |
OPERATING GUIDES
The material can be applied by slot or roll coating applicators. Suggested operation temperature is 150 – 1800C
for both, depending on machines, substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.
PACKAGE
6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box. Please consult the sales representative for special requirements.
STORAGE & SHELF LIFE
The material can be stored indoor for 12 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 350C and above 50C. Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.
FAQ
1. What is your delivery date ?
A: The delivery date is 7-15 days after packing designs approved, and receipt
of payment.
2. What is your first order payment terms ?
A: 30% deposit in advance and 70% balance before shipment.
3. Can you send us samples of diaper raw material ?
A: Yes, free samples can be sent out, the freight charge is paid by you.
(1). You can provide your a/c like DHL or FEDEX or TNT
(2). You can call your courier to pick up at our office.
(3). You can pay us the express charge by western union or T/T.
4. Where is your factory located? How can I visit it.
A:Our factory is based in Quanzhou city,Fujian province,China
You can fly to Jinjiang air port, we will pick you up.
Video
Video
Video
Video
Video
Video
Video
|
|
| MOQ: | 1000kg |
| Price: | Negotiation |
| Standard Packaging: | 1kg sausage wrapped with meltable film, 25kg/box |
| Delivery Period: | 7 working days |
| Payment Method: | T/T, D/P, L/C |
| Supply Capacity: | 4000 TON per Month |
Adhesive for Constrction application of diaper and sanitary napkin
Specification
| Name | PSA Hot Melt Adhesive Sanitary Napkins and Diapers Glue |
| Material | Synthetic resin and rubber |
| Appearance | Light yellow transparent Solid 100%, in Block |
| Softening point | Approx. 81°C |
| Application temperature | 150-180 degree |
| Smell | Slight smell of resin |
| Toxicity | None |
| Viscosity, cps: | |
| @125°C | 9800 Cps(as reference) |
| @150°C | 2700 Cps(as reference) |
| @175°C | 1500 Cps(as reference) |
| Storage | 2 years in dry and cool environment below 35°C and far from fire, unexposed to the sunlight |
OPERATING GUIDES
The material can be applied by all types of spray and slot applicators. Suggested operation temperature is 130 –
160 0 C for both, depending on machines, substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.
PACKAGE
1kg sausage wrapped with meltable film, 25kg/box.
Please consult the sales representative for special requirements.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original
packages under dry and clean conditions at ambient temperature below 35 0 C and above 5 0 C.
Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination.
The material is applied hot. Appropriate personal protective clothing and eye protection are strongly
recommended to prevent burns.
Adequate ventilation is suggested to remove any vapors or fumes generated.
Rotate stocks and using the oldest stock first.
| Composition | Resin and thermoplastic rubber |
| Gardner Color | ≤ G1 |
| Appearance | Light yellow translucent solid |
| Brookfield Viscosity | 6200 mPa.s at@200°C |
| 10100 mPa.s at@180°C | |
| 19500 mPa.s at@160°C | |
| 43000 mPa.s at@140°C | |
| Softening point | Approx. 101°C |
| Application Instruction | 1. Suggested operation temperature: 150°C-180°C. |
| 2. Application methods : slot or roll coating. | |
| 3. Substrates, release paper and application environment will affect its adhesion performance, so trial use is recommended. | |
|
4. There should be no dust and oil on substrates and release paper. Substrates should be well conditioned under standard temperature and humidity |
|
| Package | 6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box. |
| Storage | The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 350C and above 50C. Direct sunlight and moisture condensation must be prevented. |
OPERATING GUIDES
The material can be applied by slot or roll coating applicators. Suggested operation temperature is 150 – 1800C
for both, depending on machines, substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.
PACKAGE
6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box. Please consult the sales representative for special requirements.
STORAGE & SHELF LIFE
The material can be stored indoor for 12 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 350C and above 50C. Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.
FAQ
1. What is your delivery date ?
A: The delivery date is 7-15 days after packing designs approved, and receipt
of payment.
2. What is your first order payment terms ?
A: 30% deposit in advance and 70% balance before shipment.
3. Can you send us samples of diaper raw material ?
A: Yes, free samples can be sent out, the freight charge is paid by you.
(1). You can provide your a/c like DHL or FEDEX or TNT
(2). You can call your courier to pick up at our office.
(3). You can pay us the express charge by western union or T/T.
4. Where is your factory located? How can I visit it.
A:Our factory is based in Quanzhou city,Fujian province,China
You can fly to Jinjiang air port, we will pick you up.
