Product Details:
Payment & Shipping Terms:
|
Product: | 100% Solid Hot Melt HM PSA Used For Making Pharmaceutical Bottle PP Labelstock | Physical: | 100% Solid |
---|---|---|---|
Color: | Yellow Transparent | Odor: | Odorless |
Samples: | Available | Shelf Life: | 24 Months |
High Light: | HM PSA Hot Melt Adhesive,Solid Hot Melt Rubber Based Glue,Pharmaceutical Bottle PP Labelstock PSA Glue |
100% Solid Hot Melt HM PSA Used For Making Pharmaceutical Bottle PP Labelstock
Product description
It is a synthetic rubber based hot melt pressure sensitive adhesive specifically developed for label applications where good permanent adhesion is required.
The product is featured excellent tack and peel, good wetting to substrates and good die-cuttability.
Technical data
Appearance : | Yellow translucent solid |
Color (Gardner) : | ≤ G5 |
Softening Point (R&B) : | 102℃ |
Viscosity (Brookfield) : | @160℃ 10,500 cps |
Operating guides
The material can be applied by slot or roll coating applicators.
Suggested operation temperature is 150 – 180℃ for both, depending on machines, substrates, and plant conditions.
Package
6.25kg or 1kg block wrapped with siliconized release paper, or with meltable film 25kg/box.
Please consult the sales representative for special requirements.
Storage condition
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 35℃ and above 5℃.
Direct sunlight and moisture condensation must be prevented.
Operating Precaution
Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal protective clothing and eye protection are strongly recommended to prevent burns.
Adequate ventilation is suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.
Contact Person: Victor
Tel: +8615216725374