|
| MOQ: | 500kgs |
| Price: | 2.8-3.8 |
| Standard Packaging: | 6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box. |
| Delivery Period: | 5-6 working days |
| Payment Method: | L/C, T/T |
| Supply Capacity: | 6000MT per month |
DESCRIPTION
The JaourTak ® is a synthetic rubber based hot melt pressure sensitive adhesive specifically developed for on line labeling for PET bottles. It is water white transparent in color. The product is featured high tack and peel, good wetting to substrates, no flagging after ageing, good machinability and non-stringing, excelent pot and ageing stability.
SUGGESTED USES
On line labeling for PET bottles.
TYPICAL PROPERTIES
| Appearance | Water white transparent solid |
| Color (Gardner) | ≤ G1 |
| Softening Point (R&B) | approx. 76°C |
| Viscosity (Brookfield) | |
| @110 ° C | approx. 4,800 cps |
| @120 ° C | approx. 2,500 cps |
| @130 ° C | approx. 1,500 cps |
| @140 ° C | approx. 1000 cps |
OPERATING GUIDES
The material can be applied by slot or roll coating applicators. Suggested operation temperature is 110 – 140 °C for both, depending on machines, substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.
PACKAGE
1kg block wrapped with siliconized release paper, 20kg/box; or, 1.04kg block wrapped with siliconized release
paper, 25kg/box.
Please consult the sales representative for special requirements.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 35 0°C and above 5 °C. Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.
Video
Video
Video
Video
|
|
| MOQ: | 500kgs |
| Price: | 2.8-3.8 |
| Standard Packaging: | 6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box. |
| Delivery Period: | 5-6 working days |
| Payment Method: | L/C, T/T |
| Supply Capacity: | 6000MT per month |
DESCRIPTION
The JaourTak ® is a synthetic rubber based hot melt pressure sensitive adhesive specifically developed for on line labeling for PET bottles. It is water white transparent in color. The product is featured high tack and peel, good wetting to substrates, no flagging after ageing, good machinability and non-stringing, excelent pot and ageing stability.
SUGGESTED USES
On line labeling for PET bottles.
TYPICAL PROPERTIES
| Appearance | Water white transparent solid |
| Color (Gardner) | ≤ G1 |
| Softening Point (R&B) | approx. 76°C |
| Viscosity (Brookfield) | |
| @110 ° C | approx. 4,800 cps |
| @120 ° C | approx. 2,500 cps |
| @130 ° C | approx. 1,500 cps |
| @140 ° C | approx. 1000 cps |
OPERATING GUIDES
The material can be applied by slot or roll coating applicators. Suggested operation temperature is 110 – 140 °C for both, depending on machines, substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.
PACKAGE
1kg block wrapped with siliconized release paper, 20kg/box; or, 1.04kg block wrapped with siliconized release
paper, 25kg/box.
Please consult the sales representative for special requirements.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 35 0°C and above 5 °C. Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.
