Send Message
products
PRODUCTS DETAILS
Home > Products >
Low Creep Pressure Sensitive Elastic Hot Melt Adhesive For Diapers

Low Creep Pressure Sensitive Elastic Hot Melt Adhesive For Diapers

MOQ: 1000kg
Price: Negotiate
Standard Packaging: 1kg/block, 25 blocks/25kg/carton then in pallet
Delivery Period: 5-8 work days
Payment Method: L/C, D/A, D/P, T/T
Supply Capacity: 5000 tons per month
Detail Information
Place of Origin
Shanghai China
Brand Name
Jaour
Certification
ISO14000, ISO9001, ROHS, REACH, FDA
Model Number
N/M
Product:
Rubber Base Pressure Sensitive Adhesive
Classification:
Hot Melt Adhesives For Diapers
Usage:
Elastic Adhesive For Baby Diaper, Adult Diaper, Sanitary Napkins
Color::
Light Yellow Or Water White Transparent
Factory Price:
Yes
Export:
By Ourself
Application:
Baby Diaper & Adult Diaper & Sanitary Napkin
Port:
Shanghai
Minimum Order Quantity:
1000kg
Price:
Negotiate
Packaging Details:
1kg/block, 25 blocks/25kg/carton then in pallet
Delivery Time:
5-8 work days
Payment Terms:
L/C, D/A, D/P, T/T
Supply Ability:
5000 tons per month
High Light:

colored hot glue

,

low temp hot glue

Product Description

Low Creep Pressure Sensitive Elastic Hot Melt Adhesive For Diapers

 

DESCRIPTION

glue type rubber based hot melt PSA
usage Elastic glue for adult and baby diapers
performance good tack, well bonding, low creep
application temperature 130-165℃

 

Composition Resin and thermoplastic rubber
Gardner Color ≤ G1
Appearance Light yellow translucent solid
Brookfield Viscosity 6200 mPa.s at@200°C
10100 mPa.s at@180°C
19500 mPa.s at@160°C
43000 mPa.s at@140°C
Softening point Approx. 101°C
Application Instruction 1. Suggested operation temperature: 150°C-180°C.
2. Application methods : slot or roll coating.
3. Substrates, release paper and application environment will affect its adhesion performance, so trial use is recommended.

4. There should be no dust and oil on substrates and release paper.

Substrates should be well conditioned under standard temperature and humidity

Package 6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box.
Storage The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 350C and above 50C. Direct sunlight and moisture condensation must be prevented.

 

OPERATING GUIDES

The material can be applied by all types of spray and slot applicators. Suggested operation temperature is 130 –
160 ℃ for both, depending on machines, substrates, and plant conditions.

 

TYPICAL PROPERTIES

Appearance : Light yellow or Water white Transparent
Color (Gardner) : G1- G5
Softening Point (R&B) : approx. 80℃±10  

Viscosity (Brookfield) : @180 ℃ approx. 800±100 cps

 

STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original
packages under dry and clean conditions at ambient temperature below 35 ℃and above 5 ℃.
Direct sunlight and moisture condensation must be prevented.

 

OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination.
The material is applied hot. Appropriate personal protective clothing and eye protection are strongly
recommended to prevent burns.
Adequate ventilation is suggested to remove any vapors or fumes generated.
Rotate stocks and using the oldest stock first.

 

 

Company Information

Shanghai Jaour attracts a team of experienced elitists in hot melt adhesive industry. The company is specialized in

pressure sensitive hot melt adhesive for nonwoven disposables, medicals, industrial tapes & labels, and waterproofing

membranes, including the research & development, manufacturing, sales and after-sales services.

 

1) Rich experience in OEM & ODM service, our customers cover more than 50 countries.

2) Professional management team and standard quality control procedures.

3) Modern facilities and hygenic standard workshop.

4) Advanced production equipments.

5) We own 3 branch factories.

7) We have enjoyed an excellent reputation from 20 Years' successful business experience.

 

FAQ

 

1. What is your delivery date ?
A: The delivery date is 7-15 days after packing designs approved, and receipt

of payment.


2. What is your first order payment terms ?
A: 30% deposit in advance and 70% balance before shipment.

3. Can you send us samples of diaper raw material ?
A: Yes, free samples can be sent out, the freight charge is paid by you.
(1). You can provide your a/c like DHL or FEDEX or TNT
(2). You can call your courier to pick up at our office.
(3). You can pay us the express charge by western union or T/T.

4. Where is your factory located? How can I visit it.
A:Our factory is based in Shanghai city,China, you can fly to Hongqiao air port, we will pick you up.

Low Creep Pressure Sensitive Elastic Hot Melt Adhesive For Diapers 0

products
PRODUCTS DETAILS
Low Creep Pressure Sensitive Elastic Hot Melt Adhesive For Diapers
MOQ: 1000kg
Price: Negotiate
Standard Packaging: 1kg/block, 25 blocks/25kg/carton then in pallet
Delivery Period: 5-8 work days
Payment Method: L/C, D/A, D/P, T/T
Supply Capacity: 5000 tons per month
Detail Information
Place of Origin
Shanghai China
Brand Name
Jaour
Certification
ISO14000, ISO9001, ROHS, REACH, FDA
Model Number
N/M
Product:
Rubber Base Pressure Sensitive Adhesive
Classification:
Hot Melt Adhesives For Diapers
Usage:
Elastic Adhesive For Baby Diaper, Adult Diaper, Sanitary Napkins
Color::
Light Yellow Or Water White Transparent
Factory Price:
Yes
Export:
By Ourself
Application:
Baby Diaper & Adult Diaper & Sanitary Napkin
Port:
Shanghai
Minimum Order Quantity:
1000kg
Price:
Negotiate
Packaging Details:
1kg/block, 25 blocks/25kg/carton then in pallet
Delivery Time:
5-8 work days
Payment Terms:
L/C, D/A, D/P, T/T
Supply Ability:
5000 tons per month
High Light

colored hot glue

,

low temp hot glue

Product Description

Low Creep Pressure Sensitive Elastic Hot Melt Adhesive For Diapers

 

DESCRIPTION

glue type rubber based hot melt PSA
usage Elastic glue for adult and baby diapers
performance good tack, well bonding, low creep
application temperature 130-165℃

 

Composition Resin and thermoplastic rubber
Gardner Color ≤ G1
Appearance Light yellow translucent solid
Brookfield Viscosity 6200 mPa.s at@200°C
10100 mPa.s at@180°C
19500 mPa.s at@160°C
43000 mPa.s at@140°C
Softening point Approx. 101°C
Application Instruction 1. Suggested operation temperature: 150°C-180°C.
2. Application methods : slot or roll coating.
3. Substrates, release paper and application environment will affect its adhesion performance, so trial use is recommended.

4. There should be no dust and oil on substrates and release paper.

Substrates should be well conditioned under standard temperature and humidity

Package 6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box.
Storage The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 350C and above 50C. Direct sunlight and moisture condensation must be prevented.

 

OPERATING GUIDES

The material can be applied by all types of spray and slot applicators. Suggested operation temperature is 130 –
160 ℃ for both, depending on machines, substrates, and plant conditions.

 

TYPICAL PROPERTIES

Appearance : Light yellow or Water white Transparent
Color (Gardner) : G1- G5
Softening Point (R&B) : approx. 80℃±10  

Viscosity (Brookfield) : @180 ℃ approx. 800±100 cps

 

STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original
packages under dry and clean conditions at ambient temperature below 35 ℃and above 5 ℃.
Direct sunlight and moisture condensation must be prevented.

 

OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination.
The material is applied hot. Appropriate personal protective clothing and eye protection are strongly
recommended to prevent burns.
Adequate ventilation is suggested to remove any vapors or fumes generated.
Rotate stocks and using the oldest stock first.

 

 

Company Information

Shanghai Jaour attracts a team of experienced elitists in hot melt adhesive industry. The company is specialized in

pressure sensitive hot melt adhesive for nonwoven disposables, medicals, industrial tapes & labels, and waterproofing

membranes, including the research & development, manufacturing, sales and after-sales services.

 

1) Rich experience in OEM & ODM service, our customers cover more than 50 countries.

2) Professional management team and standard quality control procedures.

3) Modern facilities and hygenic standard workshop.

4) Advanced production equipments.

5) We own 3 branch factories.

7) We have enjoyed an excellent reputation from 20 Years' successful business experience.

 

FAQ

 

1. What is your delivery date ?
A: The delivery date is 7-15 days after packing designs approved, and receipt

of payment.


2. What is your first order payment terms ?
A: 30% deposit in advance and 70% balance before shipment.

3. Can you send us samples of diaper raw material ?
A: Yes, free samples can be sent out, the freight charge is paid by you.
(1). You can provide your a/c like DHL or FEDEX or TNT
(2). You can call your courier to pick up at our office.
(3). You can pay us the express charge by western union or T/T.

4. Where is your factory located? How can I visit it.
A:Our factory is based in Shanghai city,China, you can fly to Hongqiao air port, we will pick you up.

Low Creep Pressure Sensitive Elastic Hot Melt Adhesive For Diapers 0

Sitemap |  Privacy Policy | China Good Quality Hot Melt PSA Adhesive Supplier. Copyright © 2018-2024 hotmeltpsaadhesive.com . All Rights Reserved.