Payment & Shipping Terms:
|Product:||Hot Melt Adhesive||Color:||Light Yellow Or Transparent|
|Sample:||Free And Available||Lead Time:||7-10days|
Strong adhesion Hot Melt Pressure Sensitive Adhesive for labels
This kind glue is synthetic rubber based hot melt pressure sensitive adhesive specifically developed for paper labels and film
labels. The product is featured high tack and peel, high shear, and
good ageing performance.
Paper label, film labels, different substrates lamination.
Other pressure sensitive adhesive applications that high bond strength and tack, high shear are required.
The material can be applied by slot or roll coating applicators. Suggested operation temperature is 150 – 180 ℃
for both, depending on machines, substrates, and plant conditions.
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.
6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box.
Please consult the sales representative for special requirements.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original
packages under dry and clean conditions at ambient temperature below 35 0 C and above 5 0 C.
Direct sunlight and moisture condensation must be prevented.
Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal
protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is
suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.
Q: Are you the factory or trading company?
A: We are professional manufacturer for Hot Melt Glue Since 2006;We have three factories.
Q: What is your Minimum Order Quantity of your Product?
A: Normally the MOQ is 1Ton;
Q: What's your payment term?
A: Normally we do 30% T/T IN ADVANCE, 70% balance before shipment. Other payment terms can be discussed case by case;
Q: What's your after-sales service?
A: Free online technology services 24h hours or engineers are available to serve adhesive application overseas and travel cost will be born by our side;
Q: Where is the factory location?
A: Our head office is in Shanghai and have two branches in Jiangsu province.
Q: How Arrive to the factory?
A: You can arrive to Shanghai Hongqiao Airport or Hongqiao railway station, we will pick up you when you arrive.
Contact Person: Alex