|
| MOQ: | 500kg |
| Price: | Negotiate |
| Standard Packaging: | 6.25kg/block, 4 blocks/25kg/carton |
| Delivery Period: | 5-8 work days |
| Payment Method: | L/C, D/A, D/P, T/T |
| Supply Capacity: | 4000 tons per month |
Rubber baed Thermoplasticity Hot Melt Adhesive for Medical Tape Applications
SUGGESTED USES
Medical tapes, plasters and bandages to various substrates, wound dressing.
Other pressure sensitive adhesive applications that high bond strength and tack, high shear are required.
TYPICAL PROPERTIES
| Composition | Resin and thermoplastic rubber |
| Gardner Color | ≤ G1 |
| Appearance | Light yellow translucent solid |
| Brookfield Viscosity | 6200 mPa.s at@200°C |
| 10100 mPa.s at@180°C | |
| 19500 mPa.s at@160°C | |
| 43000 mPa.s at@140°C | |
| Softening point | Approx. 101°C |
| Application Instruction | 1. Suggested operation temperature: 150°C-180°C. |
| 2. Application methods : slot or roll coating. | |
| 3. Substrates, release paper and application environment will affect its adhesion performance, so trial use is recommended. | |
|
4. There should be no dust and oil on substrates and release paper. Substrates should be well conditioned under standard temperature and humidity |
|
| Package | 6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box. |
| Storage | The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 350C and above 50C. Direct sunlight and moisture condensation must be prevented. |
OPERATING GUIDES
The material can be applied by slot or roll coating applicators. Suggested operation temperature is 150 – 180 0 C
for both, depending on machines, substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.
PACKAGE
6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box.
Please consult the sales representative for special requirements.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original
packages under dry and clean conditions at ambient temperature below 35 0 C and above 5 0 C.
Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal
protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is
suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.
COMPANY ADVANTAGE
| 1.Zero risky cooperation: We take full responsibilities for all Jaour’s products and will not let customers take any risks. |
| 2.Be your strong backing: Not only help customers to get profit, but also to build an experienced tech team and a professional sales team. |
| 3.One station purchasing: We have professional experience to make all raw materials loaded in one container safely. Small consignment can share big order price at Jaour. |
| 4.Competitive price: We cooperate with multi-national enterprises in depth and become strategic partners with them. Based on our bulk purchase quantities, we can get best prices from them and share the competitive prices with our customers. |
Video
|
|
| MOQ: | 500kg |
| Price: | Negotiate |
| Standard Packaging: | 6.25kg/block, 4 blocks/25kg/carton |
| Delivery Period: | 5-8 work days |
| Payment Method: | L/C, D/A, D/P, T/T |
| Supply Capacity: | 4000 tons per month |
Rubber baed Thermoplasticity Hot Melt Adhesive for Medical Tape Applications
SUGGESTED USES
Medical tapes, plasters and bandages to various substrates, wound dressing.
Other pressure sensitive adhesive applications that high bond strength and tack, high shear are required.
TYPICAL PROPERTIES
| Composition | Resin and thermoplastic rubber |
| Gardner Color | ≤ G1 |
| Appearance | Light yellow translucent solid |
| Brookfield Viscosity | 6200 mPa.s at@200°C |
| 10100 mPa.s at@180°C | |
| 19500 mPa.s at@160°C | |
| 43000 mPa.s at@140°C | |
| Softening point | Approx. 101°C |
| Application Instruction | 1. Suggested operation temperature: 150°C-180°C. |
| 2. Application methods : slot or roll coating. | |
| 3. Substrates, release paper and application environment will affect its adhesion performance, so trial use is recommended. | |
|
4. There should be no dust and oil on substrates and release paper. Substrates should be well conditioned under standard temperature and humidity |
|
| Package | 6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box. |
| Storage | The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 350C and above 50C. Direct sunlight and moisture condensation must be prevented. |
OPERATING GUIDES
The material can be applied by slot or roll coating applicators. Suggested operation temperature is 150 – 180 0 C
for both, depending on machines, substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.
PACKAGE
6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box.
Please consult the sales representative for special requirements.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original
packages under dry and clean conditions at ambient temperature below 35 0 C and above 5 0 C.
Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal
protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is
suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.
COMPANY ADVANTAGE
| 1.Zero risky cooperation: We take full responsibilities for all Jaour’s products and will not let customers take any risks. |
| 2.Be your strong backing: Not only help customers to get profit, but also to build an experienced tech team and a professional sales team. |
| 3.One station purchasing: We have professional experience to make all raw materials loaded in one container safely. Small consignment can share big order price at Jaour. |
| 4.Competitive price: We cooperate with multi-national enterprises in depth and become strategic partners with them. Based on our bulk purchase quantities, we can get best prices from them and share the competitive prices with our customers. |
