Payment & Shipping Terms:
|Product:||Hot Melt Adhesive For Industrial Tapes||Material:||Rubber Based|
|Color:||Transparent Yellow||Usage:||Industrial Tapes|
|Appearance:||100% Solid||Sample:||Free And Available|
Strong tack good ageing performance Hot Melt Adhesive for Industrial Tapes
The JaourTak this kind glue is a synthetic rubber based hot melt pressure sensitive adhesive specifically developed for
industrial tape applications where good cohesion and holding power are required. The product is featured high
cohesion, tack and peel, good wetting to substrates.
The material can be applied by slot die or roll coating applicators. Suggested operation temperature is 150 – 180
0C for both, depending on machines, substrates, and plant conditions.
|Packing & Loading||1kg sausage packing||16 tons in one 20ft container||24 tons in one 40ft container|
|6.25kgs block packing||18 tons in one 20ft container||24 tons in one 40ft container|
|180kg drum packing||12.6 tons in one 20ft container||23.9 tons in one 40ft container|
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original
packages under dry and clean conditions at ambient temperature below 35
0C and above 5
0C. Direct sunlight and moisture condensation must be prevented.
Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal
protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is
suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.
Contact Person: Alex