Payment & Shipping Terms:
|Product Name:||Hot Melt Pressure Construction Adhesive For Adult Diaper And Baby Diaper Making||Material:||Rubber Based|
|Color:||Light Yellow Transparent WATER WHITE||Odour:||Low|
|Sample:||Available||Shelf Life:||24 Months|
Hot Melt Pressure Construction Adhesive For Adult Diaper And Baby Diaper Making
The JaourMelt this kind glue is a synthetic rubber based hot melt adhesive specifically developed for construction
applications of nonwoven disposables. It is featured low odor and light color. It is with good machinability and
provides good penetration and wettability to various substrates, high bond strength and tack.
The product is suitable for construction adhesive for nonwoven disposable applications.
Appearance : Light yellow transparent solid
Color (Gardner) : ≤ G3
Softening Point (R&B) : approx. 77 ℃
Viscosity (Brookfield) : @120 ℃ approx. 8,700 cps
The material can be applied by all types of spray and slot applicators. Suggested operation temperature is 130 –
160 0 C for both, depending on machines, substrates, and plant conditions.
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.
1kg sausage wrapped with meltable film, 25kg/box.
Please consult the sales representative for special requirement.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original
packages under dry and clean conditions at ambient temperature below 35 0 C and above 5 0 C.
Direct sunlight and moisture condensation must be prevented.
Do not mix with other adhesives to prevent contamination.
The material is applied hot. Appropriate personal protective clothing and eye protection are strongly
recommended to prevent burns.
Adequate ventilation is suggested to remove any vapors or fumes generated.
Rotate stocks and using the oldest stock first.
Contact Person: Alex