Payment & Shipping Terms:
|Product:||Jaour Low Odour And Transparent Hot Melt Rubber Adhesive For IndustrialTape||Substrate:||Paper, Cotton Or Film|
|Peel Strength::||＞15N/in||Packing:||Block With Film Then In Carton|
industrial hot melt glue,
hot melt adhesive for electronics
Jaour Low Odour And Transparent Hot Melt Rubber Adhesive For Industrial Tape
|Composition||Resin and thermoplastic rubber|
|Gardner Color||≤ G1|
|Appearance||Light yellow translucent solid|
|Brookfield Viscosity||6200 mPa.s at@200°C|
|10100 mPa.s at@180°C|
|19500 mPa.s at@160°C|
|43000 mPa.s at@140°C|
|Softening point||Approx. 101°C|
|Application Instruction||1. Suggested operation temperature: 150°C-180°C.|
|2. Application methods : slot or roll coating.|
|3. Substrates, release paper and application environment will affect its adhesion performance, so trial use is recommended.|
4. There should be no dust and oil on substrates and release paper.
Substrates should be well conditioned under standard temperature and humidity
|Package||6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box.|
|Storage||The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 350C and above 50C. Direct sunlight and moisture condensation must be prevented.|
This is a hot melt adhesive designed for tape. Good balance of peel,tack,holding power and low temperature performance. Good resistant aging.
PHYSICAL PROPERTY1. Appearance:Yellow block
1. Substrates, release paper and application environment will affect its adhesion performance, so trial use is recommended.
2. There should be no dust and oil on substrates and release paper. Substrates should be well conditioned under standard temperature and humidity.
3. Recommended application temperature: 150-180℃
4. Application methods: slot, spiral spray, fiber spray, multiline, etc.
Shanghai Jaour attracts a team of experienced elitists in hot melt adhesive industry. The company is specialized in
pressure sensitive hot melt adhesive for nonwoven disposables, medicals, industrial tapes & labels, and waterproofing
membranes, including the research & development, manufacturing, sales and after-sales services.
1) Rich experience in OEM & ODM service, our customers cover more than 50 countries.
2) Professional management team and standard quality control procedures.
3) Modern facilities and hygenic standard workshop.
4) Advanced production equipments.
5) We own 3 branch factories.
7) We have enjoyed an excellent reputation from 13 Years' successful business experience.
More about Jaour
|Main Material||Rubber, Resin and Glycerinum.|
|Payment||L/C, D/A, D/P, T/T, we are a big company and accept various payment method.|
|Shipping||Sea/Air shipment or express such as TNT, DHL, UPS and Fedex.|
|Packing||Usually 6.25kg/block and 4 blocks/ 25kgs/carton, carton size:535*257*228mm.|
|Why choose us?||We are factory with 21 years professional hot melt adhesive manufacture experience.|
|Certificate we have||ISO14000, ISO 9001, ROHS, REACH FDA VOC.|
Contact Person: Gordon